GATECH MD or GATECH AD (Manual Dispenser or Automatic Dispenser) with up to date technology for the application of powder paints. Very light and reliable. High Voltage up to 100 kV. Only low tension on cable between Dispenser and control unit. Certified for Zone 21 (internal coating). Designed for reliable processing of standardised Metallic powder paints and of course all standard powder paints*. Certified for Zone 21 (internal coating). EX certified. * Exept for Enamel Powder. Enamel requires special Powder dispenser, special Injector etc. Call for a Equipment designed for Enamel. Technical Data: Weight: 470g Polarity: negative Input voltage: 0 to 9.5 V eff AC Frequency: 18.000 Hz +/- 1% Output voltage: up to 100 kV Max current: 140 micro A
		GATECH ECU (Economy Control Unit) with all needed features. All parameters ,Air and High Voltage, can be adjusted manually. Additionally the microA (hardness of the High Voltage) can be chosen by a 3 step switch. Technical Data: Weight: approx. 8 Kg Working temperature: +10°C +45°C Input voltage: 230V +/- 10%  (115V on request) Air pressure: max. 8 bar Water content: max. 1.3 g/Nmc max Oil content: max. 0.01 mg/Nmc max Air consumption: approx. 9 Nmc/h
		Manual unit on wheels with hopper or box vibrator. Available for 115V or 230V. Stainless Steel Hopper (approx. 60 l) with Injector, ready to use.
		Small automatic unit with control box. Integrated main ON/OFF and pressure regulator. Very economical and easy to use.
		Intermediate or High End Controller. Microprocessor controlled. On request it will be equipped with a Can-Bus   connection. If equipped with a Can-Bus controller the Intermediate or High End  control unit can be remote controlled by a PC with an integrated Can-Bus Controller. Special Software needed.